• Epoxy
•  ::Silver Tip
•  ::Marinepoxy
•  ::System Three
•  ::West System
•  ::Clear Coat
•  ::Pigments
• Fiberglass etc.
•  ::fibreglass tape
•  ::biaxial cloth
•  ::woven fabric
•  ::Dynel
•  ::carbon/kevlar
• Core material
•  ::Plywood
•  ::Foam Core
•  ::Honey Comb
•  ::Composite Parts
• Fillers
• Putties
• Glues & Adhesives
• Paint & primer
•  ::System Three
•  ::Sterling paint
•  ::Sterling primer etc.
•  ::Awlgrip
•  ::Interlux
•  ::KiwiGrip non-slip
• Buoyancy foam
• Abrasives
• Composite tools
• Hardware
• Kits
• Surfboards

• Order information
• Shipping
• Help
• Search
• Email
• About Us

How To Build The Outboard Dory 16 In 12 Easy Steps

A Twelve Step Program For Boat Builders...

Step 1:
On the flat cockpit sole panel (all dimensions for the all parts are given on the plans), install the three stringers made from 2x6's.

Step 2:
Cover the stringers with the bottom panel.

Step3:
Cover the keel sides, build fiberglass seams.

Step 4:
Flip the bottom assembly over.

Step 5:
Install the mid mold on the cockpit sole.

Step 6:
Install the bulkheads: they act as molds but stay in the boat.

Step 7:
Install the transom panel.

Step 8:
Install the quarter seat sides and outboard clamping board.

Step 9:
Wrap the lower side panel (dimensions on the plans) around the structure.

Step 10:
Install the topside panel overlapping the lower panel.

Step 11:
Cut bulkheads to size, cover seats and foredeck, finish fiberglass taping.

Step 12:
Test run . . .

If you did not find the answer to your question, please use our message board and we will respond within a few hours.
Or explore the HowTo files at our technical support web site bateau2.com