• Epoxy
•  ::Silver Tip
•  ::Marinepoxy
•  ::System Three
•  ::West System
•  ::Clear Coat
•  ::Pigments
• Fiberglass etc.
•  ::fibreglass tape
•  ::biaxial cloth
•  ::woven fabric
•  ::Dynel
•  ::carbon/kevlar
• Core material
•  ::Plywood
•  ::Foam Core
•  ::Honey Comb
•  ::Composite Parts
• Fillers
• Putties
• Glues & Adhesives
• Paint & primer
•  ::System Three
•  ::Sterling paint
•  ::Sterling primer etc.
•  ::Awlgrip
•  ::Interlux
•  ::KiwiGrip non-slip
• Buoyancy foam
• Abrasives
• Composite tools
• Hardware
• Kits

• Order information
• Shipping
• Help
• Search
• Email
• About Us

Console Installation

How to Install a Console on a Cockpit Sole:

-Locate and scribe outline.
-Cover bottom contact area with epoxy putty using a serrated spatula.
- Position console and fasten with bolts through sole.
- Remove excess putty around base.
- Build fiberglass seam between console bottom perimeter and cockpit sole.

Important: It is not visible on the drawing but the fiberglass lamination extends under the bolts and washers.

If you did not find the answer to your question, please use our message board and we will respond within a few hours.
Or explore the HowTo files at our technical support web site bateau2.com